- Contact Person : Mr. Jin Jack
- Company Name : Shandong Lvte Air Conditioning System Co., Ltd.
- Tel : 86-536-2119006
- Fax : 86-536-2257000
- Address : Shandong,Weifang,No. 3999, South Airport Road, Weicheng District
- Country/Region : China
- Zip : 261052
LTLHM(R) High Efficiency Energy Saving CE Certificate Ground Source Heat Pump
High Efficiency Energy Saving CE Certificate Ground Source Heat Pump
Introduction: LTLHM(G)(R) Screw Compressors Ground Source Heat Pump for central heating and cooling
-Water Source(Water to Water) Heat Pump(WSHP)
-Ground Source Heat Pump(GSHP)
-Geothermal Heat Pump(GHP)
Model Details:
MODELS: LTLHM(R)-35---LTLHM(R)-700
R407C with Screw Compressors
Heating Capacity: 142-2632KW; Cooling Capacity: 130-2340KW
MODELS: LTLHG(R)-55---LTLHG(R)-800
R134A with Screw Compressors
Heating Capacity: 198-2848KW; Cooling Capacity: 185-2800KW
Features:
Wide range of application:Acting as multi-function unit such as cooling, heating, sanitary hot water separately or simultaneously. Wide application as hotel, apartment, villa, factory, shopping center, office building, school, etc.
Green Products:Adopting non-pollution and environment-friendly refrigerant; Great environmental and economic benefit: no boiler or cooling tower; less space, less CO2 and less initial investment. Run-time without waste discharge, when heating replaces the boiler;
Stable and Reliable Operation:
1)Semi-hermetic screw compressor for mod. 185÷3700.Each compressor is equipped with a crankcase heater and a thermal overload cut-out; the screw compressor is also complete with a built-in electronic protection with temperature sensor located directly in the motor winding and on the discharge line.
2)The refrigerant circuit is complete with sight glass, filter drier, high and low pressure gauges, solenoid valve, direct expansion valve, high and low pressure switch.
3)Shell and tube dry expansion type condenser, factory insulated with flexible close cell material. 4. Shell and tube type evaporator, factory insulated with flexible close cell material.
4)The electric panel consists of compressor breaker, compressor contactor, phase sequence relay, control circuit breaker, microprocessor control with function display.
5)LCD display, touch screen control panel as standard.
6)Automatic operation dramatically reducing maintenance cost thanks to reliable microprocessor system.
7)For the units with semi-hermetic screw compressor, an infinitely variable capacity control system that is capable of exactly matching the demand requirement of the system is to be supplied. This system is to provide precise and stable control of supplywater temperature over the complete range of operating conditions.
High Efficiency and Energy Saving:COP 4.5-5.5, low running cost, compare with other heating system can save 1/2-1/3.
Model Details:
R407C Models: LT L H M (R) --- 80
LT: LVTE Company Products Code/L: Screw Compressor/H: Heat Pump (Cooling&Heating)/M: R407C-Standard Type/80: Normal Cooling Capacity (USRT)
Working Design Standard Conditions:
1.Cooling Standard Conditions: condenser water inlet/outlet temperature18ºC/29ºC, evaporator water inlet/outlet temperature 12ºC/7ºC;
2.Heating Standard Conditions: condenser water inlet/outlet temperature 40 ºC /45 ºC, evaporator water inlet/outlet temperature 15 ºC /7 ºC;
3.Heat recovery equipments can be added.
Model Details:
Standard Model LTLHM(R)- | 40 | 50 | 60 | 70 | 80 | 90 | 100 | 120 | 130 | 140 | 160 | 170 | 180 | |||
Heating Capacity | kW | 165 | 198 | 231 | 265 | 325 | 353 | 383 | 466 | 499 | 559 | 616 | 658 | 680 | ||
104kCal/h | 14.2 | 17.3 | 19.8 | 22.8 | 28 | 30.4 | 32.9 | 40.1 | 42.9 | 48.1 | 53 | 56.6 | 58.5 | |||
Cooling Capacity | kW | 150 | 180 | 210 | 240 | 285 | 315 | 345 | 420 | 450 | 500 | 553 | 585 | 630 | ||
104kCal/h | 12.9 | 15.5 | 18.1 | 20.6 | 24.5 | 27.1 | 29.7 | 36.1 | 38.7 | 43 | 47.6 | 50.3 | 54.2 | |||
Electrical Parameters | Power Supply | 3/N/PE AC380V/220V 50HZ | ||||||||||||||
Input | Heating | kW | 37.9 | 45.9 | 53.2 | 60.9 | 73.6 | 79.5 | 88.6 | 107.6 | 115.3 | 129.2 | 142.4 | 152 | 157.1 | |
Power | Cooling | kW | 28.1 | 33.7 | 39.1 | 44.7 | 53.9 | 59.5 | 65 | 79 | 84.6 | 94.7 | 104.4 | 111.4 | 118.8 | |
Control System | Professional heat pump controller,PID regulator,English color touch screen | |||||||||||||||
Energy Control | % | 25—50—75—100 | ||||||||||||||
Security | Overload, high voltage, wrong Phase, water, oil, antifreeze switch, high temperature protection | |||||||||||||||
Compressor | Type | Semi-hermetic Screw Comprssors | ||||||||||||||
Q'TY | SET | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | ||
Refrigerant | Refrigerant | R407C | ||||||||||||||
Charge | kg | 30 | 36 | 42 | 48 | 60 | 65 | 70 | 89 | 95 | 110 | 120 | 130 | 140 | ||
Evaporator | Type | Efficient Shell and Tube Heat Exchanger | ||||||||||||||
Water | Heating | m3/h | 16.2 | 19.4 | 22.6 | 25.8 | 30.8 | 34 | 37.3 | 46.7 | 50 | 55 | 60 | 65 | 69 | |
Flow | Cooling | m3/h | 30 | 36 | 42 | 48 | 57 | 63 | 69 | 84 | 90 | 100 | 111 | 117 | 126 | |
Pressure Loss | Kpa | ≤70 | ||||||||||||||
Dirt factor | m2·°C/kW | 0.086 | ||||||||||||||
Interface Dim.(DN) | mm | 80 | 100 | 100 | 100 | 100 | 125 | 125 | 125 | 125 | 125 | 150 | 150 | 150 | ||
Condenser | Type | Efficient Shell and Tube Heat Exchanger | ||||||||||||||
Water | Heating | m3/h | 30 | 36 | 42 | 48 | 57 | 63 | 69 | 84 | 90 | 100 | 111 | 117 | 126 | |
Flow | Cooling | m3/h | 16.2 | 19.4 | 22.6 | 25.8 | 30.8 | 34 | 37.3 | 46.7 | 50 | 55 | 60 | 65 | 69 | |
Pressure Loss | Kpa | ≤70 | ||||||||||||||
Dirt factor | m2·°C/kW | 0.086 | ||||||||||||||
Interface Dim.(DN) | mm | 100 | 100 | 100 | 100 | 125 | 125 | 125 | 125 | 125 | 150 | 150 | 150 | 150 |
Standard Model LTLHM(R)- | 200 | 230 | 260 | 290 | 320 | 350 | 380 | 420 | 460 | 520 | 570 | 630 | 700 | |||
Heating Capacity | kW | 745 | 902 | 998 | 1125 | 1257 | 1355 | 1440 | 1630 | 1804 | 1996 | 2236 | 2464 | 2632 | ||
104kCal/h | 64.7 | 77.5 | 85.8 | 96.8 | 108.1 | 116.8 | 123.8 | 140.2 | 155 | 172 | 192 | 212 | 226 | |||
Cooling Capacity | kW | 690 | 810 | 900 | 1000 | 1106 | 1170 | 1300 | 1470 | 1620 | 1800 | 2000 | 2212 | 2340 | ||
104kCal/h | 59.3 | 69.6 | 77.4 | 86 | 95.2 | 100.6 | 114.4 | 127 | 139 | 155 | 172 | 190 | 200 | |||
Electrical Parameters | Power Supply | 3/N/PE AC380V/220V 50HZ | ||||||||||||||
Input | Heating | kW | 172.2 | 208.4 | 230.6 | 260.1 | 291 | 313.7 | 333.4 | 377.3 | 417 | 461 | 516.8 | 569.6 | 608 | |
Power | Cooling | kW | 130.2 | 152.8 | 169.2 | 190.5 | 212.9 | 232.1 | 250.9 | 277.4 | 306 | 338.4 | 378.8 | 417.6 | 445.6 | |
Control System | Professional heat pump controller,PID regulator,English color touch screen | |||||||||||||||
Energy Control | % | 25—50—75—100 | ||||||||||||||
Security | Overload, high voltage, wrong Phase, water, oil, antifreeze switch, high temperature protection | |||||||||||||||
Compressor | Type | Semi-hermetic Screw Comprssors | ||||||||||||||
Q'TY | SET | 1 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 4 | 4 | 4 | 4 | 4 | ||
Refrigerant | Refrigerant | R407C | ||||||||||||||
Charge | kg | 150 | 170 | 200 | 220 | 245 | 270 | 290 | 310 | 340 | 380 | 435 | 460 | 500 | ||
Evaporator | Type | Efficient Shell and Tube Heat Exchanger | ||||||||||||||
Water | Heating | m3/h | 75 | 68 | 97 | 110 | 122 | 133 | 144 | 158 | 175 | 194 | 225 | 240 | 256 | |
Flow | Cooling | m3/h | 138 | 162 | 180 | 202 | 224 | 246 | 266 | 294 | 324 | 360 | 414 | 445 | 470 | |
Pressure Loss | Kpa | ≤70 | ||||||||||||||
Dirt factor | m2·°C/kW | 0.086 | ||||||||||||||
Interface Dim.(DN) | mm | 150 | 150 | 200 | 200 | 200 | 200 | 200 | 200 | 150×2 | 150×2 | 200×2 | 200×2 | 200×2 | ||
Condenser | Form | Efficient Shell and Tube Heat Exchanger | ||||||||||||||
Water | Heating | m3/h | 138 | 162 | 180 | 202 | 224 | 246 | 266 | 274 | 324 | 360 | 414 | 445 | 470 | |
Flow | Cooling | m3/h | 75 | 88 | 97 | 110 | 122 | 133 | 144 | 158 | 175 | 194 | 225 | 240 | 256 | |
Pressure Loss | Kpa | ≤70 | ||||||||||||||
Dirt factor | m2·°C/kW | 0.086 | ||||||||||||||
Interface Dim.(DN) | mm | 150 | 125×2 | 125×2 | 150×2 | 150×2 | 150×2 | 150×2 | 150×2 | 200×2 | 200×2 | 200×2 | 200×2 | 200×2 |
R134a Models: LT L H G (R) --- 80
LT: LVTE Company Products Code/L: Screw Compressor/H: Heat Pump (Cooling&Heating)/G: R134a-High Temperature Output Type/80: Normal Cooling Capacity (USRT)
Working Design Standard Conditions:
1.Cooling Standard Conditions:condenser water inlet/outlet temperature18ºC/29ºC, evaporator water inlet/outlet temperature 12ºC/7ºC;
2.Heating Standard Conditions: condenser water inlet/outlet temperature 55ºC/60ºC, evaporator water inlet/outlet temperature 15ºC/7ºC; Max. Hot Water Output 65ºC;
3.Heat recovery equipments can be added.
Model Details:
LTLHG(R) Model Data Sheet: R134a | ||||||||||||||||
Model LTLHG(R)- | 55 | 65 | 70 | 85 | 95 | 110 | 130 | 145 | 150 | 165 | 180 | 200 | 220 | |||
Heating Capacity | kW | 198 | 224 | 251 | 305 | 337 | 385 | 455 | 510 | 538 | 574 | 632 | 706 | 770 | ||
104kCal/h | 17 | 19.3 | 21.6 | 26.2 | 30 | 33.1 | 39.1 | 43.8 | 46.3 | 49.4 | 54.4 | 60.7 | 66.2 | |||
Cooling Capacity | kW | 185 | 210 | 235 | 290 | 325 | 375 | 435 | 475 | 525 | 555 | 615 | 700 | 750 | ||
104kCal/h | 15.9 | 18.1 | 20.2 | 24.9 | 28 | 32.3 | 37.4 | 40.8 | 45.2 | 47.7 | 52.8 | 60.2 | 64.5 |
High Temp. Model LTLHG(R)- | 260 | 290 | 330 | 360 | 400 | 440 | 520 | 580 | 615 | 655 | 720 | 800 | |||
Heating Capacity | kW | 910 | 1020 | 1148 | 1264 | 1412 | 1540 | 1820 | 2040 | 2152 | 2296 | 2529 | 2824 | ||
104kCal/h | 78.3 | 87.7 | 98.7 | 108.7 | 121.4 | 132.4 | 156.5 | 175.4 | 185.1 | 197.5 | 217.5 | 242.9 | |||
Cooling Capacity | kW | 870 | 950 | 1110 | 1230 | 1400 | 1500 | 1740 | 1900 | 2100 | 2220 | 2520 | 2800 | ||
104kCal/h | 74.8 | 81.7 | 95.5 | 105.8 | 120.4 | 129 | 149.6 | 163.4 | 180.6 | 190.9 | 216.7 | 240.8 |
Products in Stock:
Products waiting for Testing:
Finished Products:
Products Export:
Certificate:
LTLHM(R) High Efficiency Energy Saving CE Certificate Ground Source Heat Pump